Split air conditioners are one of the best options to keep your house cool during the summer months. AC installation has become very common these days as they are very easy to install and do not make any noise. You need not have to break your walls or windows for split air conditioner installation. These are ductless air conditions, and so all you need to do is install the indoor unit inside the house, and the outside unit will be placed outdoors. These two units are connected with the help of tubes.
The process of installing these split air conditioners is very simple, and so you need not have to worry about how to install an air conditioner. If you wish to save a few bucks and complete the installation process yourself, this installation guide is for you.
Simple Steps to Guide Installing Ductless Split AC
We have explained the spilt air conditioner installation in a few simple steps that are easy to understand and implement. So, here is how you are going to get started:
Select the right location:
The first step is selecting the right location for split AC installation. You should select the location very carefully. The indoor unit should be installed at least seven feet from the ground. There should be at least 15 cm of space in all directions of the unit for proper airflow. The wall that you are choosing should be strong with no vibration.
Mounting plate and outlet hole:
In the second step, you will have to install the outlet’s mounting plate and drill holes. You should hold the plate horizontally against the wall. Make sure that you are holding the plate straight. With the help of a pencil, mark all the points where you need to fix the screws and fasten the mounting plate. Take off the plate and drill the holes, and place the plastic anchors into the holes. You can now place the mounting plate and tighten the screws. Just beside or above the mounting plate, you should make a hole for wires and pipes connected to the outdoor unit.
Mount the AC unit:
You can now lift the unit and send all the wires, copper pipes, and drainage pipes through the outlet role. You can tape them all together for easy handling. Air conditioner wiring requirements will be specified on the package. Now place the unit on the mounting plate in the right way.
Outdoor unit area:
Now that you are done with the indoor unit air conditioning installation, you will have to pick a location for your outdoor unit. You should pick a location with good shade and no dust. Also, ensure that there is at least a 30 cm gap between the wall and the unit. You should never place it close to the wall as it will affect its performance.
Now once the location is decided, you will have to fix the brackets to the wall. You can drill holes to the wall and fasten them to the wall with the screws provided.
Mount the outdoor unit:
Your next step is to place the outdoor unit on the bracket and fix the holes. The holes and the unit should coincide with each other so that you will be able to fix it well. Bolt them, and you are done here.
Connect the wires:
You should now make all the connections from the electrical ports. You can use the diagram provided by the manufacturer. Follow the split AC installation tips provided by the manufacturer to make sure that it works well.
Copper wires connection:
The final step of installing split AC is to connect the copper wires. If possible, clean them with the help of a small vacuum pump. With the nuts provided, you will have to connect the copper pipes to the respective ports. Connect them tight and then open the gas valves.
So, this is how to install AC in your house in just a few simple steps. You don’t need an expert on it. It can help you save on the installation cost of split AC in India. Ensure that you have at least one or two-person with you to help you during the installation process.
Also Read :-